€ 40.50 · 4.5 (172) · In Magazzino
The MTM Hydro PF22 Professional Foam Cannon is the perfect tool for any professional who wishes to apply a thick rich coat of snow soap to the paintwork!
MTM Hydro PF22.2 Professional Snow Foam Cannon
The all new MTM Hydro PF22.2 Professional Snow Foam Cannon is the latest in the MTM series of Snow foam cannons! With its new standing bottle you no longer have to worry about spills and tipping over. Featuring both horizontal AND vertical foam adjustment control which gives one the ability to control the foam for every situation!
The MTM Hydro PF22.2 Professional Foam Cannon is the perfect tool for any professional who wishes to apply a thick rich coat of snow soap to the paintwork! By utilizing a foam cannon you are able to deposit the cleansing solution across the surface to loosen and remove dirt, grime, and abrasive particles before you ever touch the paint. On sensitive surfaces with bonded dirt this can be a key factor in lessening swirls on the surface over time. Simply attach the apparatus to your pressure washer and pour the desired amount of snow soap into the canister.
The PF22.2 Foam Cannon includes a 1.1mm/3.0 orifice, along with the pre-installed 1.25mm/3.5 orifice. By switching out the pre-installed orifice (1.25mm/3.5 orifice) with the included orifice (1.1mm/3.0 orifice), it allows you to convert your kit into a low pressure/volume device if needed.
Features:
Spray pattern: both horizontal & vertical adjustability
Italian calibrated 32 oz new stand up grey bottle
Internal agitator: creates dense foam
Updated connectors: brass plated to resist corrosion - includes M22 & 1/4 quick disconnect connector
Chemical injection knob: increases or decreases the foam output
Replaceable filter: prevents grit from entering the soap stream
Adjustable fan blades: changes the jet spray from narrow to wide
Specifications:
Designed For Gas Pressure Washers but may be used with electric. For Electric you may have to install the 1.1mm orifice which is supplied with this model (PF22.2) - Also see *NOTE* at bottom
Min. 1,100 psi - Max. 5,000 psi
Min. 1.4 gpm - Max. 5.3 gpm
Max Temp: 140°F
Manufacturer: MTM Hydro
Made in: Italy
Contents:
Italian Nickel Plated Brass -Single Cast Foam Cannon body
Italian Calibrated 32 oz New Stand up Grey Bottle
1/4 x 9 tube for drawing chemical
3.5 Orifice (1.25mm) installed in the Foamer Body
3.0 Orifice (1.1mm) included with kit
Fitting pack (2-pieces) containing a 1/4 M22 adaptor and 1/4 QC Plated Steel Plug
Manual with care instructions and exploded view
Directions:
Pour snow soap of your choice into canister (Consult the product information of the Snow Soap you use for amount to pour in canister)
It is recommended that pressure washer regulator be adjusted to a lower pressure at initial cannon installation and then adjusted to reach optimal performance
Concentration & consistency of foam depend upon type and concentration of detergent used as well as the flow/discharge of the pressure washer
After use run clean water through the system and completely rinse the spray head and detergent bottle and suction tube with clean, clear water to assure correct operation and an extremely long life
*NOTE*
A specific 1/4 Male plug may be required in order to attach the QC plug to the end of some residential pressure washer setups. MTM Hydro 1/4 plugs are standard for industrial use but many residential pressure washers such as Generac, Greenworks, Ryobi, AR Blue Clean,etc have certain models where the coupler will not receive an MTM plug. Not all of these brands are impacted, just certain models. If you look closely, the Chamfer at the end of an MTM plug as well as the neck is, 1.5mm shorter than some couplers may allow. We now offer this new Low Profile QC plug. Once you install the correct plug in your new MTM Foam Cannon, you will see that it was worth finding this specialized fitting as these foam cannons are second to none, even when manufacturers try t…
MTM PF22.2 Foam Cannon, New Standing Bottle
This MTM Hydro Magnum 28 Foam Kit The Magnum 28 Foam Kit will now include a 1.1mm/3.0 orifice, along with the pre-installed 1.25mm/3.5 orifice. With the All-New MTM Hydro Magnum 28 Gun & Foam Kit, getting dirty never looked this good! Eliminate the risk of swirl marks when you apply thick foam onto your vehicle, truck, boat, house, or restaurant grill & hood. Included with this kit is our new SGS28 spray gun.
MTM Hydro 14.7028 Magnum 28 Foam Cannon Kit w/ Stand Up Bottle
PF22.2 MTM HYDRO Snow Foam Lance Cannon 11.6 mm 1/4 Quick Release
MTM Hydro PF22.2 The Best Foam Kit
Hawaii's NEWEST Auto Detail Supply Superstore!
MTM Hydro Parts MTM Hydro PF22.2 Foam Cannon
The MTM Original Foam Cannon 1.1mm Orifice Installed is the best power washer on the market. This is the original foam cannon that I've had for 6 or so years. MTM has a rebuild kit for it but I've never needed it. The new PF-22 is subtly better but this one still gets the job done quite well. I haven't used the knock off but I know this is much better built.
MTM Hydro Original Foam Cannon
Auto & Home Cleaning Get great foam coverage when cleaning cars, RVs, houses, restaurant hoods, and more! The MTM Hydro PF-22.2 foam cannon attaches to your existing pressure washer and allows you to control spray by adjusting a chemical injection knob. The internal agitator creates dense foam to completely cover dirty surfaces.
MTM Hydro PF22.2 Foam Cannon
Mtm Pf22.2 Snow Foam Cannon
Stoner Extreme Mega Foam Cannon Kit MTM Hydro PF22.2 – Stoner Car Care
, The all new MTM Hydro PF22.2 Professional Snow Foam Cannon is the latest in the MTM series of Snow foam cannons! With its new standing bottle
MTM Hydro PF22.2 Professional Snow Foam Cannon
MTM Hydro PF-22 Professional Foam Cannon Lance Kit - Al Hameem W.L.L
MTM Hydro's Italian Manufactured PF22 Foam Cannon is now offered with their certified Hi-Foam PerFOAMance car shampoo. Whether you are foaming down
MTM HYDRO - PF22.2 Foam Cannon W/ Snow Foam
MTM PF22.2 Foam Cannon