Overture PETG 3D Printer Filament 1.75mm -6pack – Overture 3D

Visit "About Us" page to see the complete version of this video. INTRODUCTION Overture PETG filaments are made of premium PETG resin which combines the advantages of PLA and ABS such as odorless, esay-to-print, little shrinkage rate; Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High
Visit About Us page to see the complete version of this video. INTRODUCTION Overture PETG filaments are made of premium PETG resin which combines the advantages of PLA and ABS such as odorless, esay-to-print, little shrinkage rate; Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility Over 8 years experience of researching and manufacturing 3D printer filaments, Overture care about every detail when we design our spool and filaments.? Buy with Confidence, 100% Satisfaction Guarantee. E-mail us if you have any issues or questions, we will make every effort to provide you with immediate help until you are satisfied. SPECIFICATIONS Young’s modulus (X-Y) 1472 ± 270 (MPa) Tensile strength (X-Y) 31.9 ± 1.1 (MPa) Elongation at break (X-Y) 6.8 ± 0.9 (%) Bending modulus 1174 ± 64 (MPa) Bending strength 53.7 ± 2.4 (MPa) Charpy impact strength 5.1 ± 0.3 (kJ/m2) FAQs: Why can't the filaments stick to the build bed? 1. Check the temperature setting before printing, PETG filaments have higher extrusion temperature than that of PLA; 2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure a strong first layer adhesion; 3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate; 4. If the effect is not good, it is recommended to try printing the draft before printing.

PETG filaments are made of premium PETG plastic which combines the advantages of other filaments such as safe and odorless; little shrinkage rate;

OVERTURE PETG Filament 1.75mm with 3D Build Surface 200 x 200 mm 3D Printer Consumables, 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.05 mm, Fit

OVERTURE Silk PLA 1.75mm Dual Color Filament, Clog-Free Shiny 3D Printer Filament, 1kg Spool(2.2lbs), Dimensional Accuracy +/- 0.02 mm, Fit Most FDM Printer(Silk Green-Magenta) - Yahoo Shopping

Enhance your 3D printing experience with OVERTURE PETG 3D Printer Filament. This high-quality filament is made of PLA material and has a filament

OVERTURE PETG 3D Printer Filament 1.75mm, 1kg Filament Dimensional

OVERTURE TPU Filament 1.75mm Flexible TPU Roll, 95A Soft 3D Printer Filament, 1kg Spool (2.2 lbs), Dimensional Accuracy +/- 0.02 mm (TPU Transparent) : Industrial & Scientific

Overture PETG 3D Printer Filament - Space Gray - 1.75mm / 322m - 1kg

OVERTURE Silk PLA 1.75mm Dual Color Filament, Clog-Free Shiny 3D Printer Filament, 1kg Spool(2.2lbs), Dimensional Accuracy +/- 0.03 mm, Fit Most FDM Printer Orange

OVERTURE Silk Filament PLA 1.75mm Clog-Free Shiny 3D Printer Consumables, 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.03 mm, Fit Most FDM Printer (Blue)

【High Performance & Compatibility】 Combines the advantages of both PLA and ABS with Overture PETG, featuring the ease of printing with PLA and

OVERTURE PETG Filament 1.75mm, 3D Printer Filament, 1kg Filament (2.2lbs), Dimensional Accuracy 99% Probability +/- 0.02 mm, Fit Most FDM Printers

OVERTURE PETG Filament 1.75mm, 3D Printer Filament, 1kg Filament (2.2lbs), Dimensional Accuracy 99% Probability +/- 0.03 mm, Fit Most FDM Printer, Space Gray - Yahoo Shopping

Still air vacuum sealed from the manufacturer please see photos

OVERTURE PETG 3D Printer Filament 1.75MM, Rock White 1kg New Hard To Find Color

Overture - Petg 3D Printer Filament - Starry Blue - 1.75 mm/1 kg

Overture - Petg 3D Printer Filament - Starry Blue - 1.75 mm/1 kg