€ 967.50 · 4.5 (423) · In Magazzino
PLA-CF Carbon Fiber Reinforced PLA Bambu PLA Bambu PLA-CF Bambu PLA-CF is carbon fiber reinforced PLA with improved stiffness and strength. PLA-CF is easy to print and beginner-friendly like regular PLA. It is AMS compatible with low clogging risk at high-speed printing. The prints are in matte fin
Bambu PLA-CF
Bambu PLA-CF is carbon fiber reinforced PLA with improved stiffness and strength. PLA-CF is easy to print and beginner-friendly like regular PLA. It is AMS compatible with low clogging risk at high-speed printing. The prints are in matte finish with almost invisible layer lines, which make it suitable for printing general engineering parts or models requiring a better appearance, like bike frames, brackets and toys.
Carbon fiber texture & Minimized layer lines
The addition of carbon fiber gives prints a unique matte finish and effectively hides layer lines, providing a smooth, premium look.
Display of Prints
Bambu PLA-CF could be paired with any PLA series filament to make your prints more colorful and achieve various texture requirements.
Improved mechanical properties
Bambu PLA-CF exceeds the mechanical properties of PLA Matte in XY Bending Strength, Z Bending Strength, XY Bending Modulus, Z Bending Modulus, XY Impact Strength, and Z Impact Strength by between 20% and 115%, making it more suitable for printing models with higher strength requirements.
Mechanical Properties Comparison
PLA Matte
PLA-CF
Improved %
Tensile Strength - XY/MPa
32
38
19%
Tensile Strength - Z/MPa
25
26
4%
Bending Strength - XY/MPa
53
89
67%
Bending Strength - Z/MPa
32
49
53%
Bending Modulus - XY/MPa
2360
3950
57%
Bending Modulus - Z/MPa
2040
2260
10%
Impact Strength - XY/(kJ/m²)
19.2
23.2
20%
Impact Strength - Z/(kJ/m²)
6.6
7.8
18%
*Drying PLA is recommended for humid environments at 55 °C for 8 hours before printing.
Stablized printing dimension
Bambu PLA-CF features low shrinkage and warping resistance to achieve a perfect matching accuracy between prints parts.
Minimal effort in support removal
Bambu PLA-CF is designed to support itself. It can be removed more easily compared to regular PLA, and still maintains a smooth support surface.
Not prone to clogging in high-speed printing
Bambu PLA-CF is just as easy to print as regular PLA. It can be printed smoothly and consistently at high speed without clogging.
Accessory Compatibility
Recommended
Not Recommended
Build Plate
Cool Plate, High Temperature Plate or Textured PEI Plate
Engineering Plate
Hotend
Hardened Steel Nozzle (0.4 / 0.6 / 0.8 mm)
Stainless Steel Nozzle (0.2 / 0.4 mm)
Glue
Bambu Liquid GlueGlue Stick
/
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
Parameters Comparison
Learn more different filaments comparison on Bambu Filament Guide >>
PETG-CF
PLA-CF
Filament Type
Carbon Fiber Infill
Carbon Fiber Infill
Hotend Compatibility
Hardened Steel (0.4, 0.6, 0.8 mm)
Hardened Steel (0.4, 0.6, 0.8 mm)
Build Plate Compatibility
Engineering Plate, High Temperature Plate, Textuerd PEI Plate
Cool Plate, High Temperature Plate, Textuerd PEI Plate
AMS Compatibility
Yes
Yes
Surface
Shiny
Matte
Print Speed
< 200 mm/s
< 200 mm/s
Toughness (Impact Strength - XY)
41.2 kJ/m²
23.2 kJ/m²
Strength (Bending Strength - XY)
70 MPa
89 MPa
Stiffness (Bending Modulus - XY)
2910 MPa
3950 MPa
Layer Adhesion (Impact Strength - Z)
10.7 kJ/m²
7.8 kJ/m²
Heat Resistant(HDT, 0.45 MPa)
74 °C
55 °C
Recommended Printing Settings
Drying Settings (Blast Drying Oven)
55 °C, 8 h
Printing and Keeping Container\'s Humidity
< 20% RH (Sealed, with Desiccant)
Nozzle Temperature
210 - 240 °C
Bed Temperature (with Glue)
35 - 45 °C
Printing Speed
< 200 mm/s
Physical Properties
Density
1.22 g/cm³
Vicar Softening Temperature
69 °C
Heat Deflection Temperature
55 °C
Melting Temperature
165 °C
Melt Index
3.7 ± 0.6 g/10 min
Mechanical Properties
Tensile Strength
38 ± 4 MPa
Breaking Elongation Rate
8.4 ± 3.2 %
Bending Modulus
3950 ± 190 MPa
Bending Strength
89 ± 4 MPa
Impact Strength
23.2 ± 3.7 kJ/m²
Download Filament TDS Download Filament MSDS
Printing Tips
• Drying PLA-CF is optional, but recommended to dry out before use to get higher printing quality and the recommended drying condition is 55 ℃ for 8 hours in a blast drying oven, or 75 ℃ for 12 hours on a printer\'s heatbed. For more details please refer to Filament drying cover on WIKI.
What\'s in the Box:
Filament with Spool*1 & Desiccant*1
Filament Label*1
Package*1
Polymaker PolyTerra PLA - Pastel Rainbow– Ultimate 3D Printing Store
3D Premium PLA - High quality filaments - Formfutura
BigRep 3D Printer Filament - Source Graphics
PolyLite™ PLA-CF
PLA-CF Bambu Lab US
3D Printer Gear offers the Bambu Lab PLA-CF Lava Grey, a high-quality 3D printing filament made from renewable resources. Get yours today!
3D Printer Gear: Bambu Lab PLA-CF Lava Grey
Bambu Lab PLA CF 3D Printer Filament - 1.75mm - 1KG
Carbon Fiber PLA - PLA+CF - FabMachines
Bambu PLA-CF Filament 1.75mm 1kg - CREATE Education Marketplace
CarbonX™ PLA+CF 3D Filament
The 3D Printers now stocking Polymaker online - Buy Now
3D Volcano PLA - High quality filaments - Formfutura