Engine Flush Plus by LIQUI MOLY – LM Performance

PRODUCT DESCRIPTION Combination of active agents made up of special additives and carrier fluid. Brings all types of oilsoluble and oil-insoluble residues into suspension and removes these from the oil circuit during the next oil change. Following this, the engine that has been cleared of deposits and contaminants and
PRODUCT DESCRIPTION Combination of active agents made up of special additives and carrier fluid. Brings all types of oilsoluble and oil-insoluble residues into suspension and removes these from the oil circuit during the next oil change. Following this, the engine that has been cleared of deposits and contaminants and the fresh oil can then deliver its full performance. Highly effective cleaning fluid for clearing the engine interior of troublesome deposits. Dissolves sludge and lacquer formers quickly and reliably. All types of oil-soluble and oil-insoluble residues are brought into suspension and removed during the next oil change. An engine which has been cleaned of deposits and contamination and which is then filled with fresh oil not contaminated with old impurities can develop its full performance characteristics. Wear in the engine is thus reduced and the service life is extended. PRODUCT DETAIL For cleaning and flushing out the oil circuits of gasoline and diesel engines. 300 ml sufficient for up to 6 l of motor oil. Can be safely used in vehicles with timing belt running in oil. Not suitable for use on motorbikes with wet clutches! PROPERTIESgentle cleaning - rapid cleaning - does not attack common sealing materials - minimizes wear - simple to use without disassembly - optimal engine performance - highly economical - tested for particulate filters and catalytic converters - tested for turbochargerTECHNICAL DATAColor / appearance yellow, brown Base additive, carrier liquid Flash point 63 °C DIN ISO 2592 Pour point -45 °C DIN ISO 3016 Form liquid Viscosity at 40 °C <7 mm²/s Odor characteristic AREAS OF APPLICATION For cleaning and flushing out the oil circuits in gasoline and diesel engines. Use at each oil change. Can be safely used in vehicles with toothed belt running in oil. Not suitable for use in motorcycles with wet clutches! APPLICATION 300 ml sufficient for up to 6 l of oil. Add to the motor oil at operating temperature before the oil change. Then allow engine to idle for approx. 10 minutes. Then change the oil and the filter. Compatible with commercially available motor oils.

Engine Flush Plus

Liqui Moly Pro-Line Engine Flush, 500 ml, Oil additive

Safety Impexin Buy Liqui Moly Oils And Lubricants Online

Liquimoly 2037 Pro-Line Engine Flush, 500 ml, 6 Pack : Automotive

LIQUI MOLY - Is cleaning your engine as easy as washing

Liqui Moly 4T 20W-50 STREET 1Liter or 4Liters

Liqui Moly. Engine Flush Plus. For cleaning and flushing out the oil circuits of gasoline and diesel engines. 300 ml sufficient for up to 6 l of motor

Liqui Moly Petrol and Diesel Engine Flush Plus 300ml German Technology 8374

Liqui Moly 10 w 40 PERFORMANCE PACK FOR SCOOTERS 800 ML OIL AND ADDITIVES High Performance Engine Oil Price in India - Buy Liqui Moly 10 w 40 PERFORMANCE PACK FOR SCOOTERS

Synthoil Longtime Plus 0W-30 Engine Oil by LIQUI MOLY – LM Performance

Pro-Line Engine Flush

Simple remedy for oil sludge in the engine

Liqui Moly Engine Oil Flush Pro Line 500ml LM 2037 NEW

One 500 ml can is sufficient for up to 5 liters(1.3 gal.) of oil. Add Pro-Line Engine Flush to the engine oil at operating temperature before changing the oil. After adding the product allow the engine to idle for 10 to 15 minutes depending on the degree of contamination. Then change the oil and the filter. Pro-Line Engine Flush is compatible with most commercially available engine oils, and in oil running belt.

Liqui Moly 2037 - 500ml Pro-Line Engine Flush

300 ml engine flush suitable for upto 6 to 7 litres of engine oil, Application: Mix to the old engine oil, Turn On the engine for 20 mins at ideal

Liqui Moly Engine Flush Plus 300 ml (White Line Series)

LiquiMoly-Petrol/Diesel Engine Oil Flush 200 ml – Industrial Supply Wholesaler B2B