€ 28.50 · 4.6 (414) · In Magazzino
Under extrusion on small features : r/FixMyPrint
Ocasional underextrusion : r/FixMyPrint
Unsure what's causing this under extrusion. Ender 3 v2 Neo : r/FixMyPrint
Under extrusion at layer change? : r/FixMyPrint
issues with perimeters extrusion : r/FixMyPrint
Sunlu filament PLA. 215 degrees. 4mm retraction. 70 degree bed. .4 nozzle. : r/FixMyPrint
Issues with yellow and white filament, but no others. : r/FixMyPrint
Underextrusion just around the holes, but near perfect print otherwise. Used calibrated Pressure Advance and 5mm retraction. What is the culprit? : r/FixMyPrint
Weird under/over extrusion problems after switching to .6 nozzle : r/ FixMyPrint
Wall lines not connecting end to end. Is this a problem caused by under extrusion? : r/FixMyPrint
Is this under extrusion? : r/BambuLab
Under extrusion only on initial layer? : r/FixMyPrint
Is this under extrusion? : r/BambuLab
Under extrusion without any change in parameters whatsoever : r/ FixMyPrint
Issues with yellow and white filament, but no others. : r/FixMyPrint